Language select  


miniature gooseneck condenser microphone

The ADX15HC is professional miniature gooseneck condenser microphone designed for applications
such as podium, presentation, meetings and teleconferencing. Known for their clarity, excellent sound
quality and ease of operation, the ADX15HC will accurately capture and reproduce vocals from a
comfortable distance.
The ADX15HC is characterized with a tighter pick-up controlled hypercardioid polar pattern, helping to
isolate the speaker from other ambient noise in the room or on the stage. The ADX15HC microphone
is also available in a cardioid polar pattern (model ADX15) for uniformly control. With a wide frequency
range of 40 Hz - 18 kHz, the ADX15HC provides natural sound with exceptional transient response.
The ADX15HC microphone is equipped with an integrated preamp circuitry built into the base of
the XLR and may be mounted permanently via the flange mount or with an optional base with an
internal shock mount (SMT1218R). The microphone may also be used on a standard mic stand or
in conjunction with the Audix ATS-10 table stand with lighted on-off switch. Manufactured with very
high standards and tight tolerances, the ADX15HC features a machined brass body, field replaceable
capsule and a variety of optional accessories. The ADX15HC operates on phantom power of 18 - 52
Volts and are available in non-reflective black matte finish.

Transducer Type Pre-Polarized Condenser
Frequency Response 40 Hz - 18 kHz
Polar Pattern Hypercardioid
Output Impedance 150 Ohms balanced
Sensitivity 24 mV / Pa @ 1k
Equivalent Noise Level Level 28 dB (A weighted)
Signal to Nosie Radio 66 dB
Power Requirements 18 - 52 Volts phantom
Maximum SPL ≥120 dB
Connector Male XLR connector with 3 pin gold plated
Polarity pressure on diaphragm produces
positive voltage on pin 2 relative to pin 3
Houseing / Finish Machined Auminum and Brass / Black matte
Weight 113 g / 4 ounces
Length 413 mm / 16.25 inches

Share |
Copyright 2007 © Voci-Dorate All Rights Reserved.